RX 300 FWD V6-3.0L (1MZ-FE) (1999)
a. Remove the 4 nuts and cord clip.
b. Using SST, remove the rectifier end frame.
SST 09286-46011
c. Remove the generator washer.
6. REMOVE ROTOR FROM DRIVE END FRAME
REASSEMBLY
1. INSTALL ROTOR TO DRIVE END FRAME
a. Place the rectifier end frame on the pulley.
b. Install the rotor to the rectifier end frame.
2. INSTALL RECTIFIER END FRAME
a. Place the generator washer on the rotor.