RX 300 FWD V6-3.0L (1MZ-FE) (1999)
e. Insert SST (B) into SST (C), and attach the pulley nut to SST (C).
f.
To torque the pulley nut, turn SST (A) in the direction shown.
Torque: 110.5 Nm (1,125 kgf.cm, 81 ft.lbf)
g. Remove the generator from SST (C).
h. Turn SST (B), and remove SST (A and B).
4. INSTALL RECTIFIER HOLDER
a. Place the seal plate on the rectifier end frame.
b. Install the 4 rubber insulators on the lead wires.