RX 300 FWD V6-3.0L (1MZ-FE) (1999)
c. Install the rectifier holder with the 4 screws.
Torque: 2.9 Nm (30 kgf.cm, 26 in.lbf)
5. INSTALL VOLTAGE REGULATOR AND BRUSH HOLDER
a. Place the voltage regulator and brush holder on the rectifier end frame.
NOTE: Be careful of the holder installation direction.
b. Install the 5 screws.
Torque: 2.0 Nm (20 kgf.cm, 18 in.lbf)
c. Place the brush holder cover on the brush holder.
6. INSTALL REAR END COVER