RX 300 FWD V6-3.0L (1MZ-FE) (1999)
HINT: If the caster and steering axis inclination are not within the specification, after the camber has been correctly adjusted, recheck the
suspension parts for damaged and/or worn out parts.
Measuring Point Reference
4. INSPECT TOE-IN
If the toe-in is not within the specification, adjust it at the rack ends.
5. ADJUST CAMBER
NOTICE: After the camber has been adjusted, inspect the toe-in.
a. Remove the front wheels and ABS speed sensor clamp.
b. Remove the 2 nuts on the lower side of the shock absorber.
c. Coat the threads of the nuts with engine oil.
d. Temporarily install the 2 nuts.