RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-1639003.png)
i.
With the engine idling and valve fully opened, turn the steering wheel to full lock position.
Minimum fluid pressure: 7,845 kPa (80 kgf-cm(2),1,138 psi)
NOTICE:
-
Do not maintain lock position for more than 10 seconds.
-
Do not let the fluid temperature become too high.
j.
Disconnect the SST
k. Connect the pressure feed tube to the Power Steering Gear (PS) gear.
l.
Bleed the power steering system.
