RX 300 FWD V6-3.0L (1MZ-FE) (1999)
/Page-1301001.png)
Transmission Temperature Sensor/Switch: Service and Repair
ON-VEHICLE REPAIR
1. REMOVE VALVE BODY
2. DISCONNECT SOLENOID CONNECTOR
3. REMOVE ATF TEMPERATURE SENSOR
Remove the bolt and solenoid wire.
4. INSTALL ATF TEMPERATURE SENSOR
Install the solenoid wire with the bolt.
Torque: 5.4 Nm (55 kgf cm, 48 inch lbs.)
5. CONNECT SOLENOID CONNECTOR
6. INSTALL VALVE BODY