RX 300 FWD V6-3.0L (1MZ-FE) (1999)
7. INSTALL MANUAL DETENT SPRING
Install the screw and manual detent spring.
Torque: 1.7 Nm (17 kgf cm, 15 inch lbs.)
8. INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY
Install the 2 screws and shift lock control unit assembly.
Torque: 1.8 Nm (18 kgf cm, 16 inch lbs.)
9. INSTALL LOWER POSITION INDICATOR HOUSING
a. Install the slide cover to the lower position indicator housing.
b. Install the pattern select switch to the lower position indicator housing.
c. Install the compression spring to the shift lock release button.
d. Install the shift lock release button with the compression spring to the lower position indicator housing.