RX 300 FWD V6-3.0L (1MZ-FE) (1999)
13. INSTALL SHIFT SOLENOID VALVE
Install the 5 shift solenoid valves with the 5 bolts.
Torque:
Bolt A: 6.6 Nm (67 kgf cm, 58 inch lbs.)
Bolt B: 11 Nm (110 kgf cm, 8 ft. lbs.)
Bolt length:
Bolt A: 12 mm (0.47 inch)
Bolt B: 45 mm (1.77 inch)
14. INSTALL APPLY GASKET
a. Coat 3 new apply gaskets with ATF.
b. Install the gaskets to the transaxle case.
15. INSTALL CHECK VALVE AND SPRING
16. INSTALL VALVE BODY
a. Align the groove of the manual valve with the pin of the manual valve lever.
b. Temporarily install the valve body with the 17 bolts.
Bolt length:
Bolt A: 25 mm (0.98 inch)
Bolt B: 41 mm (1.61 inch)
Bolt C: 45 mm (1.77 inch)