RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1668001.png)
Hood Shock / Support: Removal and Replacement
HOOD SUPPORT ROD
REPLACEMENT
1. REMOVE HOOD SUPPORT ROD
a. Remove the clip and hood support from the hood panel.
HINT: While supporting the hood panel by hand, remove the hood support.
b. Remove the bolt and hood support from the vehicle body.
2. INSTALL HOOD SUPPORT ROD
a. Install the hood support with the 3 bolts.
Torque: 19.5 Nm (199 kgf.cm, 14 ft.lbf)
