RX 330 AWD V6-3.3L (3MZ-FE) (2004)
A.
Remove the 2 clips from the floor carpet cover center LH.
B.
Depress the edge of the floor carpet cover center to disengage the 2 retaining tabs.
C.
Slide the floor carpet cover toward the front of the vehicle, disengage the 2 retaining tabs from the lower instrument finish panel.
D.
Remove the floor carpet cover center LH.
4.
Remove Front Door Scuff Plate RH.
A.
Using a screwdriver, disengage the 7 retaining tabs and 3 clips, and remove the scuff plate.
HINT:
Tape the screwdriver tip before use.
5.
Remove Glove Compartment Door Assembly.
A.
Remove the 2 bolts <B> and the 2 screws <D>.
B.
Pull the glove compartment door assembly to the rear to remove it.
C.
Disconnect the connector.
6.
Remove Floor Carpet Cover Center RH.
7.
Remove Shift Lever Knob Sub-Assembly.
A.
Turn the shift lever knob counterclockwise and remove the shift lever knob sub-assembly.
8.
Remove Console Panel Upper Front.