RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REPLACEMENT
1. DRAIN BRAKE FLUID
NOTICE: Wash the brake fluid off immediately if it adheres to any painted surfaces.
2. REMOVE BRAKE ACTUATOR WITH BRACKET
a. Using SST(s), disconnect the 6 brake tubes from the actuator with bracket.
SST 09023-00100
b. Use tags or make a memo to identify the places to reconnect.
c. Pull the lock lever upward.
d. Disconnect the actuator connector.
e. Remove the 2 bolts, the nut and the actuator with bracket.