RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1125002.png)
b. Lock the hose clamp as shown in the illustration.
c. Disconnect the heater inlet water hose.
d. Remove the nut and disconnect the ground cable.
e. Disconnect the 6 fuel injector connectors.
f.
In order to remove the intake manifold, using several steps, remove the 9 bolts and 2 nuts in the sequence shown in the illustration.
15. REMOVE ENGINE MOVING CONTROL ROD
16. REMOVE WATER OUTLET
