RX 330 AWD V6-3.3L (3MZ-FE) (2004)
I.
Turn the headlight dimmer switch from the "OFF" position to the TAIL position (e.g., parking, tail, license plate, side marker, and instrument
panel lights) while the "LASER CRUISE DIVERGENCE DATA" screen is still shown on the Diagnostic Tester. (Beam axis adjustment will
be performed automatically.)
J. When the adjustment is completed, the "UPPER/LOWER SIDE" and RIGHT/LEFT SIDE" indicators show 0° and the system beeps for 10
seconds. During this time, UPPER" and "LOWER" flash alternately on the screen, and "LEFT" and "RIGHT" flash alternately on the screen.
NOTE: If the angle indicators do NOT show 0° and the system beep is NOT heard, verify that the current divergence angles are within the
Standard Values for Divergence listed in the table in step 4H. If value is out of range, go to step 1 and repeat the adjustment procedure.