RX 330 AWD V6-3.3L (3MZ-FE) (2004)
3.
REMOVE THE ENGINE UNDER COVER NO. 1
(a)
Remove the 2 clips and 6 bolts
(b)
Remove the 2 screws and undercover No. 1.
4.
DRAIN THE ENGINE COOLANT
(a)
Remove the radiator cap.
CAUTION:
Do not remove the radiator cap while the engine and radiator are hot. Hot engine coolant and steam may blow out from the radiator and cause
serious injury.
(b)
Drain engine coolant by loosening the lower drain cock plug of the radiator and the cylinder block drain cock plugs.
(c)
Tighten the cylinder block drain cock plugs.
Torque:
13 Nm (130 kgf.cm, 9 ft.lbf)
5.
REMOVE THE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH AND RH
(a)
Remove the 2 screws and 2 clips.