RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Bolt B: 3.9 Nm (40 kgf.cm, 35 in.lbf)
23.
REINSTALL THE FAN SHROUD
(a)
Reinstall the fan shroud with the four bolts.
TORQUE:
8.0 Nm (82 kgf.cm, 71 in.lbf)
(b)
Reconnect the fan motor connector.
(c)
Reconnect the engine coolant reservoir hose.
24.
REINSTALL THE RADIATOR SUPPORT SUBASSEMBLY UPPER
(a)
Reinstall the 1 lower bolt for the vertical support.
(b)
Reinstall the one clip and reconnect the air temperature sensor.
(c)
Reinstall the 5 bolts and the radiator support sub-assembly upper.
NOTE:
Secure the upper member with the retaining claws of the radiator upper support.
TORQUE:
7.8 Nm (71 kgf.cm, 62 in.lbf)
(d)
Reconnect the 2 horn connectors.