RX 330 AWD V6-3.3L (3MZ-FE) (2004)
a. Disconnect the throttle motor connector.
b. Disconnect the water by-pass hose No. 3.
c. Disconnect the water by-pass hose No. 2.
d. Disconnect the union to check valve hose.
e. Disconnect the ventilation hose
f.
Remove the 3 nuts and separate the pressure feed tube.
g. Remove the 2 bolts, then remove the engine hanger No. 1.
h. Remove the 2 bolts, then remove the surge tank stay No. 1.
i.
Remove the 2 bolts, then remove the surge tank stay No. 2.
j.
Using a socket hexagon wrench 8, remove the 4 bolts.
k. Remove the 2 nuts, then remove the emission control valve bracket and the intake air surge tank.
l.
Remove the gasket from the intake air surge tank.