RX 330 AWD V6-3.3L (3MZ-FE) (2004)
B.
Disconnect the connector and clamp.
C.
Remove the 2 bolts, nut, and the cooler compressor bracket.
D.
Remove the 3 bolts and the compressor and magnetic clutch.
9.
Remove the magnetic clutch assembly.
NOTE:
Do NOT change the combination of the magnetic clutch washers used before disassembly.
A.
Remove the 2 bolts and bracket.
B.
Place the compressor and magnetic clutch in a vise.
NOTE:
Do NOT get the bracket and harness caught in the vise.