RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1418012.png)
e. Remove the 2 O-rings from the cooler evaporator sub-assy No.1.
42. INSTALL COOLER EVAPORATOR SUB-ASSY NO.1
a. Sufficiently apply compressor oil to the 2 new O-rings and fitting surface of the cooler expansion valve.
Compressor oil: ND-OIL8 or equivalent
b. Install the 2 O-rings on the cooler evaporator sub-assy No.1.
c. Install the cooler evaporator sub-assy No.1 to the heater case.
d. Install the heater case with the 11 screws.
e. Install the air duct sub-assy with the 4 claws.
