RX 330 AWD V6-3.3L (3MZ-FE) (2004)
3.
REMOVE THE FRONT DOOR SCUFF PLATE LH
(a)
Using the nylon pry tool, disengage the 7 claws and 3 clips.
(b)
Disconnect the connector.
(c)
Remove the scuff plate.
4.
REMOVE THE COWL SIDE TRIM SUBASSEMBLY LH
5.
REMOVE THE INSTRUMENT FINISH PANEL SUB-ASSEMBLY LOWER
(a)
Remove the bolt <B> and the screw <D>.
(b)
Disconnect the hood lock control cable assembly.
(c)
Disengage the 5 claws and the 4 clips.
(d)
Remove the instrument finish panel subassembly lower.
(e)
Disconnect the connectors.