lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Fuel Pressure Release|Service and Repair|Page 1620 > < Cabin Air Filter|Locations|Page 1615
Page 1
background image

Fuel Pressure Release: Service and Repair

PRECAUTION

1. PRECAUTION

a. Before working on fuel system, disconnect negative (-) battery cable. 
b. Do not smoke or work near fire when handling the fuel system.
c. Keep gasoline away from rubber or leather parts.

2. DISCHARGE FUEL SYSTEM PRESSURE

CAUTION:
-

Do not disconnect any part of the fuel system pressure until you have discharged the fuel system pressure.

-

Ever after discharge the fuel pressure, place a shop rag over fittings as you separate them to reduce risk of fuel spray on yourself or in the
engine compartment.

a. Disconnect the fuel pump connector.
b. Start the engine. After the engine has stopped, turn the ignition switch OFF.
c. Disconnect negative (-) battery cable.
d. Connect the fuel pump connector.

3. FUEL SYSTEM

a. When disconnecting the high fuel pressure line, a large amount of gasoline will spill out, so observe these procedures.

1. Discharge the pressure in the fuel system.
2. Disconnect the fuel pump tube.
3. Drain the fuel that remained inside the fuel pump tube.

4. To  prevent the disconnected fuel pump tube from being damaged and foreign objects from being introduced, cover with a vinyl or plastic

bag.

5. Place a tray under the vehicle or point of disconnection to catch any fuel that may spill.

Fuel Pressure Release|Service and Repair|Page 1620 > < Cabin Air Filter|Locations|Page 1615