RX 330 AWD V6-3.3L (3MZ-FE) (2004)
b. Install the intake air surge tank and emission control valve bracket with the 2 nuts.
Torque: 28 Nm (286 kgf-cm, 21 ft. lbs.)
c. Using a socket hexagon wrench 8, tighten the 4 bolts.
Torque: 28 Nm (286 kgf-cm, 21 ft. lbs.)
d. Install the surge tank stay No. 2 with the 2 bolts.
Torque: 20 Nm (199 kgf-cm, 14 ft. lbs.)
e. Install the surge tank stay No. 1 with the 2 bolts.
Torque: 20 Nm (199 kgf-cm, 14 ft. lbs.)
f.
Install the engine hanger No. 1 with tire 2 bolts.
Torque: 20 Nm (199 kgf-cm, 14 ft. lbs.)
g. Install the pressure feed tube with the 3 nuts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
h. Connect the ventilation hose.
i.
Connect the union to check. valve hose.
j.
Connect the water by-pass hose No. 2.
k. Connect the water by-pass hose No. 3.
l.
Connect the throttle motor connector.
24. INSTALL EMISSION CONTROL VALVE SET
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
25. INSTALL AIR CLEANER CAP SUB-ASSY
26. CONNECT VACUUM HOSE
27. INSTALL V-BANK COVER SUB-ASSY
a. Fit the 2 retainers and install the V-bank cover.
b. Using a socket hexagon wrench 5, tighten the 3 nuts.
Torque: 7.9 Nm (81 kgf-cm, 70 inch lbs.)
28. INSTALL COWL TOP PANEL SUB-ASSY OUTER
29. INSTALL WINDSHIELD WIPER LINK ASSY
30. INSTALL FR WIPER ARM LH
31. INSTALL FR WIPER ARM RH
32. ADD ENGINE COOLANT
33. CHECK FOR ENGINE COOLANT LEAKS