RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Required SSTs
Component Identification
Repair Procedure
CAUTION:
^
Do NOT smoke or work near an open flame when working on the fuel system.
^
Keep gasoline away from rubber or leather parts.
^
Wear safety goggles while working with fuel system under pressure.
^
Do NOT disconnect any part of the fuel system until you have discharged the fuel system pressure.
^
Even after discharging the fuel pressure, place a shop rag over fittings as you separate them to reduce risk of fuel spray on yourself or in the
engine compartment.
1.
Discharge fuel system pressure.
A.
Disconnect the fuel pump electrical connector via the access panel under the rear seat.
B.
Start the engine. After the engine has stalled, turn the ignition switch OFF.
C.
Disconnect the negative (-) battery cable.