RX 330 AWD V6-3.3L (3MZ-FE) (2004)
NOTE:
-
Check if there is any dirt or mud around the connector before this operation and remove the dirt as necessary.
-
Be careful of mud because the quick connector has an O-ring which seals the pipe and connector that can be contaminated.
-
Do not use any tool in this operation.
-
Do not bend or twist the nylon tube. Protect the connector by covering it with a vinyl or plastic bag.
-
When the pipe and connector are stuck, push and pull the connector to release and pull the connector out carefully.
b. Disconnect the fuel tank vent hose hose.
1. Deeply push the connector to release the locking tab.
2. Pinch portion A.
3. Pull out the connector.
c. Disconnect the fuel tank breather tube No.3.
1. Pinch the tube connector and then pull out the fuel tank breather tube No.3.
NOTE:
-
Check if there is any dirt or mud around the connector before this operation and remove the dirt as necessary.
-
Be careful of mud because the quick connector has an O-ring which seals the pipe and connector that can be contaminated.
-
Do not use any tool in this operation.
-
Do not bend or twist the nylon tube. Protect the connector by covering it with a vinyl or plastic bag.
-
When the pipe and connector are stuck, push and pull the connector to release and pull the connector out carefully.