RX 330 AWD V6-3.3L (3MZ-FE) (2004)
VEHICLE NOT INVOLVED IN COLLISION
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the instr pnl pass l/door airbag assy installed in the vehicle: Cuts, minute cracks or
marked discoloration on the instrument panel around the instr pnl pass l/door airbag assy.
VEHICLE INVOLVED IN COLLISION AND AIRBAG IS NOT DEPLOYED
a. Do a diagnostic system check.
b. Do a visual check which includes the following items with the instr pnl pass l/door airbag assy removed from the vehicle:
-
Cuts, minute cracks or marked discoloration on the instr pnl pass l/door airbag assy.
-
Cuts and cracks in wire harness, and chipping in connectors.
-
Deformation or cracks on the instrument panel and instrument panel reinforcement.
HINT: If the instrument panel or instrument panel reinforcement is deformed or cracked, never repair it.Always replace it with a new one.
CAUTION: For removal and installation procedures of the instr pnl pass l/door airbag assy, see "Replacement", and be sure to follow the
correct procedure.
Instrument Panel Airbag Assy Lower No.1
CAUTION: Be sure to perform the initialization of the occupant classification ECU under the conditions listed below.If the initialization is not
performed, the SRS may not operate properly.
-
The occupant classification ECU is replaced.
-
Accessories (seatback tray or seat cover, etc.) are installed to the vehicle.
-
The passenger seat is removed from the vehicle.
-
The SRS warning light comes on.
-
The vehicle is brought to the work shop for repair purpose due to the accident or collision.