RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Wheel Speed Sensor: Service and Repair
Speed Sensor, Front
SPEED SENSOR FRONT LH
REPLACEMENT
HINT: Replace the RH side by using the same procedures as those for the LH side.
1. REMOVE FRONT WHEEL
2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH
3. REMOVE SPEED SENSOR FRONT LH
a. Disconnect the speed sensor connector.
b. Remove the 2 bolts and the clamp from the body and the shock absorber assembly.
c. Remove the bolt and the speed sensor front.
NOTICE: Prevent foreign matter from attaching to the sensor tip.
4. INSTALL SPEED SENSOR FRONT LH
a. Install the speed sensor front with the bolt.
Torque: 8.0 Nm (82 kgf-cm, 71 inch lbs.)
NOTICE: Prevent foreign matter from attaching to the sensor tip.