RX 330 AWD V6-3.3L (3MZ-FE) (2004)
b. Install the pressure feed tube assy clamp with the bolt.
Torque: 9.8 Nm (100 kgf-cm, 87 inch lbs.)
60. CONNECT RETURN TUBE ASSY
a. Using SST(s), connect the return tube assy to the steering link assy.
SST 09023-12700
Torque: 22 Nm (230 kgf-cm, 16 ft. lbs.)
HINT:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 inch)
^
This torque value is effective when SST(s) is parallel to a torque wrench.
b. Install the tube clamp to the pressure feed tube assy.
c. Install the pressure feed tube clamp with the nut.
Torque: 9.8 Nm (100 kgf-cm, 87 inch lbs.)
61. INSTALL HEIGHT CONTROL SENSOR SUB-ASSY FRONT LH (W/ AIR SUSPENSION)