RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Ride Height Sensor: Service and Repair
Front
HEIGHT CONTROL SENSOR SUB-ASSY FRONT LH
REPLACEMENT
NOTICE: Before replacement, press the height control OFF switch to stop the vehicle height control operation.
1. REMOVE FRONT WHEELS
2. REMOVE HEIGHT CONTROL SENSOR SUB-ASSY FRONT LH
a. Disconnect the connector.
b. Remove the torx nut and the height control sensor from the lower arm.
c. Remove the 2 nuts and the height control sensor FR LH.
3. INSTALL HEIGHT CONTROL SENSOR SUB-ASSY FRONT LH
a. Install the height control sensor FR LH with the 2 nuts.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Install the height control sensor onto the lower arm with the torx nut.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
c. Connect the connector.
4. INSTALL FRONT WHEELS
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
5. ADJUST VEHICLE HEIGHT