RX 330 AWD V6-3.3L (3MZ-FE) (2004)
a. Gate shift lever:
1. Remove the connector from the shift lever assy.
b. Shift lever with multi-mode automatic transmission:
1. Remove the connector from the shift lever assy.
2. Using a screwdriver, release the stopper of the connector.
3. Using a small screwdriver, disengage the locking lug of terminals (1) and (6), and pull the terminals out from the rear.
25. INSTALL INDICATOR LAMP WIRE SUB-ASSY
a. Shift lever with multi-mode automatic transmission:
1. Connect the 2 terminals of indicator lamp wire harness to the connector of transmission control switch.
2. Install the connector to the shift lever assy.
b. Gate shift lever:
1. Install the connector to the shift lever assy.