RX 330 AWD V6-3.3L (3MZ-FE) (2004)
4.
Install the center differential case tapered roller bearing.
Using the SST and a press, install the outer race to the RH bearing retainer.
^
SST P/N 09950-60010 (09951-00620), 09950-70010 (09951-07150)
5.
Install the 0-ring.
A.
Apply Hypoid gear oil to a NEW 0-ring.
B.
Install the two (2) 0-rings to the RH bearing retainer.
NOTE:
Be careful NOT to twist the 0-ring and fit it into the retainer's groove properly.
6.
Install the transfer RH bearing retainer sub-assembly.
A.
Place the transfer case with the face where the RH bearing retainer is to be installed facing up, as shown in the illustration.
B.
Center-align the center differential control coupling assembly and the case.