RX 330 AWD V6-3.3L (3MZ-FE) (2004)
4. Remove the transfer case No.1 plug and remove the gasket from the plug.
5. Remove the transfer drain plug and remove the gasket from the drain plug.
6. Remove the transfer assembly.
A. Remove the 2 bolts and 6 nuts.
B. Using a plastic hammer drive out the transfer assembly from the transaxle assembly.
NOTICE
^
Disconnect the transfer assembly from the transaxle assembly without tilting.
^
When moving the transfer assembly, do NOT hold the assembly by the oil seals.