RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-1049014.png)
9. Install a NEW transfer cover gasket to the case.
10. Install the transfer assembly.
A. Apply FIPG sealant 1281 to the transaxle assembly and the transfer assembly in continuous beaded form of 1.2 mm (0.05 in.) diameter as shown
in the illustration.
FIPG sealant: Three Bond 1281, or equivalent
NOTICE
^
Remove any grease from the attaching surfaces.
^
Install the transfer assembly within 10 minutes after application of the sealant.
^
Sealant stuck on the gasket, case oil seal, and driving plug may cause oil leakage and seizure due to oil shortage.
