RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Required SSTs
NOTE:
Additional SSTs may be ordered by calling SPX-OTC at 1-800-933-8335.
Repair Procedure
1.
Confirm source of leak is the transfer case extension housing seal and NOT another attached component, such as the driveshaft yoke.
2.
Remove and replace the oil seal assembly. Refer to the Technical Information System (TIS), 2004 - 2005 model year RX 330 Repair Manual:
^
Transfer: Transfer Extension Housing Type T Oil Seal (4WD): Replacement (RX 330).
3.
Check transfer case fluid level.
4.
Road test and confirm that there is NO leak from the transfer case extension housing seal.