RX 330 AWD V6-3.3L (3MZ-FE) (2004)
Transmission Position Switch/Sensor: Service and Repair
PARK/NEUTRAL POSITION SWITCH ASSY (ATM)
REPLACEMENT
1. REMOVE BATTERY
2. REMOVE AIR CLEANER ASSY
3. REMOVE AIR CLEANER HOSE NO.1
4. REMOVE AIR CLEANER INLET NO.2
5. REMOVE AIR CLEANER BRACKET
6. REMOVE AIR CLEANER INLET NO.1
7. REMOVE INTAKE AIR RESONATOR SUB-ASSY
8. DISCONNECT TRANSMISSION CONTROL CABLE ASSY
a. Remove the nut from the control shaft lever
b. Disconnect the control cable from the control shaft lever
c. Remove the clip and disconnect the control cable from the control cable bracket.
NOTICE: Do not hold the resin guide pipe.
9. REMOVE PARK/NEUTRAL POSITION SWITCH ASSY
a. Disconnect the park/neutral position switch connector.
b. Remove the nut, washer and control shaft lever.
c. Pry out the lock plate.