RX 330 AWD V6-3.3L (3MZ-FE) (2004)
/Page-2040007.png)
c. Using a brush, coat the exposed part of the vehicle body on the vehicle side with Primer M.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not coat the adhesive with Primer M.
-
Do not keep any of the opened Primer M for later use.
d. Using a brush or sponge, coat the edge of the glass and the contact surface with Primer G.
HINT: If an area other than that specified is coated by accident, wipe off the primer with a clean shop rag before it dries.
NOTE:
-
Allow the primer coating to dry for 3 minutes or more.
-
Do not keep any of the opened Primer G for later use.
