RX 330 FWD V6-3.3L (3MZ-FE) (2006)
b. Remove the 2 bolts and the clamp from the body and the shock absorber assembly.
c. Remove the bolt and the speed sensor front.
NOTICE: Prevent foreign matter from attaching to the sensor tip.
INSPECTION
1. INSPECT FRONT SPEED SENSOR
a. Make sure that there is no looseness at the connectors' locking part and connecting part of connector.
b. Disconnect the speed sensor connector.
c. Measure the resistance according to the value(s) in the table.
Resistance LH
Resistance RH
d. Measure the resistance according to the value(s) in the table.
Resistance LH