RX 330 FWD V6-3.3L (3MZ-FE) (2006)
/Page-1166002.png)
a. Using needle nose pliers, install the cooler dryer.
b. Install new O-ring to the cap.
c. Sufficiently apply compressor oil to the fitting surfaces of the O-ring and the cap.
Compressor oil: ND-OIL 8 or equivalent
d. Using hexagon wrench 14 mm (0.55 in.), install the cap to the cooler condenser assembly.
Torque: 2.9 N.m (30 kgf.cm, 25 in.lbf)
