RX 330 FWD V6-3.3L (3MZ-FE) (2006)
d. Install the clamp and connect the connectors.
2. INSTALL WIRING AIR INDICATOR HARNESS NO.2 SUB-ASSEMBLY
3. INSTALL AIR DUCT NO.2
a. Install the air duct No. 2 with the screw.
Torque: 2.5 N.m (25 kgf.cm, 22 in.lbf)
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
5. INSTALL INSTRUMENT PANEL UNDER COVER NO.2 SUB-ASSEMBLY
6. INSTALL COWL SIDE TRIM RH SUB-ASSEMBLY
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE AIR INLET SERVO MOTOR
a. Remove the 3 screws and air inlet servomotor.