RX 330 FWD V6-3.3L (3MZ-FE) (2006)
a. Insert the terminal.
HINT:
1. Make sure the terminal is positioned correctly.
2. Insert the terminal until the locking lug locks firmly.
3. Insert the terminal with terminal retainer in the temporary lock position.
b. Push the secondary locking device or terminal retainer in to the full lock position.
5. CONNECT CONNECTOR
Voltage Check
VOLTAGE CHECK
a. Establish conditions in which voltage is present at the check point.
Example:
[A] - Ignition SW on
[B] - Ignition SW and SW 1 on
[C] - Ignition SW, SW 1 and Relay on (SW 2 off)