RX 330 FWD V6-3.3L (3MZ-FE) (2006)
6. REMOVE AIRCONDITIONER AMPLIFIER ASSEMBLY
7. REMOVE SUSPENSION CONTROL ECU
a. Disconnect the suspension control ECU connector.
b. Remove the 2 bolts and the suspension control ECU from the bracket.
INSTALLATION
1. INSTALL SUSPENSION CONTROL ECU
a. Install the suspension control ECU with the 2 bolts onto the bracket.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the suspension control ECU connector.
2. INSTALL AIRCONDITIONER AMPLIFIER ASSEMBLY
3. INSTALL ECM
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
5. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2
6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
7. INSTALL FRONT DOOR SCUFF PLATE RH