RX 350 AWD V6-3.5L (2GR-FE) (2007)
Canister Purge Control Valve: Service and Repair
Intake System
REMOVAL
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE VACUUM SWITCHING VALVE
a. Remove the 2 vacuum hoses and vacuum switching valve connector.
b. Remove the screw and vacuum switching valve.
INSTALLATION
1. INSTALL VACUUM SWITCHING VALVE
a. Install the vacuum switching valve with the screw.
b. Install the 2 vacuum hoses and vacuum switching valve connector.
2. INSTALL V-BANK COVER SUB-ASSEMBLY