RX 350 AWD V6-3.5L (2GR-FE) (2007)
1. INSTALL CHARCOAL CANISTER ASSEMBLY
a. Connect the charcoal canister assembly with the 2 nuts.
Torque: 36 N.m (367 kgf.cm, 27 ft.lbf)
b. Install the nut.
Torque: 36 N.m (367 kgf.cm, 27 ft.lbf)
c. Align the quick connector with the pipe, then push in the quick connector until the retainer makes a "click" sound to connect the charcoal
canister fuel hose to the charcoal canister assembly.
NOTE:
-
Check that there are no scratches or foreign objects around the connected part of the quick connector and pipe before this work.
-
After connecting the charcoal canister fuel hose, confirm that it is securely connected by pulling the quick connector.