RX 350 AWD V6-3.5L (2GR-FE) (2007)
f.
Connect the ventilation hose No. 2.
g. Install the clamp and connect the throttle with motor body assembly connector.
h. Connect the vapor feed hose.
i.
Connect the 2 water by-pass hoses to the throttle with motor body assembly.
5. INSTALL AIR CLEANER CASE SUB-ASSEMBLY
6. INSTALL AIR CLEANER CAP SUB-ASSEMBLY
7. ADD ENGINE COOLANT
8. CHECK FOR ENGINE COOLANT LEAKS
9. CHECK FOR FUEL LEAKS
10. INSTALL COWL TOP OUTER PANEL SUB-ASSEMBLY
11. INSTALL WINDSHIELD WIPER LINK ASSEMBLY
12. INSTALL V-BANK COVER SUB-ASSEMBLY