RX 350 AWD V6-3.5L (2GR-FE) (2007)
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a)
Install the tire pressure warning receiver assembly with the bolt.
Torque: 7.5 N*m (77 kgf*cm, 66 in.*lbf)
(b) Connect the connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
HINT: Refer to the instructions for installation of the roof headlining assembly.
3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. INSPECT TIRE PRESSURE WARNING SYSTEM
5. PERFORM INITIALIZATION
HINT: Some systems need initialization after reconnecting the cable to the negative battery terminal.