lexus Workshop Repair Guides

Lexus Workshop Service and Repair Manuals

Procedures|Page 7576 > < Procedures|Page 7574
Page 2
background image

 

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.

2. REMOVE FRONT DOOR SCUFF PLATE
3. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP
4. REMOVE REAR DOOR SCUFF PLATE
5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP
6. REMOVE LAP BELT OUTER ANCHOR COVER

a. Disengage the 2 claws and remove the lap belt outer anchor cover.

7. DISCONNECT FRONT SEAT OUTER BELT ASSEMBLY

a. Remove the bolt and disconnect the floor side of the front seat outer belt assembly.

8. REMOVE CENTER PILLAR GARNISH LOWER
9. REMOVE CENTER PILLAR GARNISH

10. REMOVE FRONT SEAT OUTER BELT ASSEMBLY

a. Turn the ignition switch to the Lock position.
b. Remove the nut and disengage the shoulder side of the front seat outer belt assembly.

c. Using a screwdriver, pull out the locking button in the direction shown by the arrow to release the lock, and disconnect the pretensioner

connector.

HINT:  Tape the screwdriver tip before use.

d. Disconnect the tension reducer connector.

e. Remove the 2 bolts and front seat outer belt assembly. 

Procedures|Page 7576 > < Procedures|Page 7574