RX 350 FWD V6-3.5L (2GR-FE) (2010)
(a) Connect the connector.
(b) Install the electrical key oscillator with the nut.
NOTICE:
Be careful when installing the electrical key oscillator. If the oscillator is dropped, replace it with a new one.
(c) Reinstall the floor carpet.
2. INSTALL REAR SEAT ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
LH Side)/Installation
3. CONNECT REAR SEAT LOCK CABLE ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
4. INSPECT REAR SEAT SLIDE ADJUSTER LOCK See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
5. INSTALL REAR SEAT TRACK BRACKET COVER LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
6. INSTALL REAR SEAT HEADREST ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for LH Side)/Installation
7. INSTALL REAR SEAT ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat Assembly (for
RH Side)/Installation
8. CONNECT REAR SEAT LOCK CABLE ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for RH Side)/Installation
9. INSPECT REAR SEAT SLIDE ADJUSTER LOCK See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Installation
10. INSTALL REAR SEAT TRACK BRACKET COVER RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Installation
11. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear
Seat Assembly (for RH Side)/Installation
12. INSTALL REAR SEAT HEADREST ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Rear Seat
Assembly (for RH Side)/Installation
From 08/2009
THEFT DETERRENT / KEYLESS ENTRY: ELECTRICAL KEY OSCILLATOR (for Center Floor): INSTALLATION
1. INSTALL ELECTRICAL KEY OSCILLATOR
(a) Connect the connector.
(b) Install the electrical key oscillator with the nut.