RX 350 FWD V6-3.5L (2GR-FE) (2010)
Emergency Battery: Service and Repair
Removal
CELLULAR COMMUNICATION: BACK-UP BATTERY: REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
HINT
Use the same procedure for the RH side and LH side See: Body and Frame/Interior Moulding / Trim/Headliner/Service and
Repair/Removal and Replacement/Removal.
3. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Removal
4. REMOVE INSTRUMENT PANEL GARNISH RH See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Removal
5. REMOVE FRONT PASSENGER SIDE KNEE AIRBAG ASSEMBLY See: Restraint Systems/Air Bag Systems/Air Bag/Service and
Repair/Removal and Replacement/Knee Airbag Assembly (for Front Passenger Side)/Removal
6. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Removal
7. REMOVE BACK-UP BATTERY WITH BRACKET
(a) Disconnect the connector.
(b) Remove the 2 bolts and back-up battery with bracket.
8. REMOVE NO. 1 TELEPHONE BRACKET
(a) Remove the nut.
(b) Disengage the 2 guides and remove the No. 1 telephone bracket as shown in the illustration.
9. REMOVE NO. 2 TELEPHONE BRACKET
(a) Remove the No. 2 telephone bracket as shown in the illustration.
10. REMOVE BACK-UP BATTERY