RX 350 FWD V6-3.5L (2GR-FE) (2010)
Emergency Contact Button: Testing and Inspection
From 08/2009
METER / GAUGE / DISPLAY: SATELLITE SWITCH: INSPECTION
1. INSPECT SATELLITE SWITCH SET
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) Apply battery voltage from the wire harness back side between the terminals of the switch, and check the lighting condition of the satellite
switch set.
OK:
Text in Illustration
HINT
If the value is not as specified, replace the satellite switch set See: Service and Repair/Satellite Switch/Removal.