RX 350 FWD V6-3.5L (2GR-FE) (2010)
/Page-2760003.png)
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION
1. INSTALL MULTI-MEDIA INTERFACE ECU (for TMC Made)
2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
(a) Install the No. 2 multi-media interface bracket with the bolt.
3. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
(a) Install the No. 1 multi-media interface bracket with the 2 bolts.
4. INSTALL MULTI-MEDIA INTERFACE ECU ASSEMBLY
(a) Connect the connector.
(b) Engage the clip and guide.
(c) Install the multi-media interface ECU assembly with the 2 bolts.
Torque : 6.0 Nm (61 kgf-cm, 53 in-lbf)
5. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Removal and Replacement/Installation
From 08/2009
AUDIO / VIDEO: MULTI-MEDIA INTERFACE ECU: INSTALLATION
1. INSTALL MULTI-MEDIA INTERFACE ECU (for TMC Made)
2. INSTALL NO. 2 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
(a) Install the No. 2 multi-media interface bracket with the bolt.
3. INSTALL NO. 1 MULTI-MEDIA INTERFACE BRACKET (for TMC Made)
(a) Install the No. 1 multi-media interface bracket with the 2 bolts.
