RX 350 FWD V6-3.5L (2GR-FE) (2010)
Garage Door Opener Transmitter: Service and Repair
Removal
Up to 08/2009
GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system See: Restraint
Systems/Air Bag Systems/Service Precautions.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE MAP LIGHT ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Console Lamp/Service and Repair/Personal
Light/Removal
4. REMOVE GARAGE DOOR OPENER TRANSMITTER
(a) Disconnect the connector.
(b) Remove the 2 screws and garage door opener transmitter.
From 08/2009
GARAGE DOOR OPENER: GARAGE DOOR OPENER TRANSMITTER: REMOVAL
1. PRECAUTION (w/ Navigation System for HDD)
NOTICE:
After the engine switch is turned off, the display and navigation module display (HDD navigation system) records various types of
memory and settings. As a result, after turning the engine switch off, make sure to wait at least 60 seconds before disconnecting the
cable from the negative (-) battery terminal.
2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system See: Restraint
Systems/Air Bag Systems/Service Precautions.
NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected See: Testing and
Inspection/Programming and Relearning/Repair Instruction - Initialization.
3. REMOVE MAP LIGHT ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Console/Console Lamp/Service and Repair/Personal
Light/Removal
4. REMOVE GARAGE DOOR OPENER TRANSMITTER