RX 350 FWD V6-3.5L (2GR-FE) (2010)
19. ADJUST SHIFT LEVER POSITION
for U660E: See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift Cable/Service and Repair/U660E
Automatic Transaxle/Installation.
for U660F: See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shift Linkage/Shift Cable/Service and Repair/U660F
Automatic Transaxle/Installation.
20. INSPECT SUSPENSION CONTROL SYSTEM
(a) Inspect the suspension control system See: Steering and Suspension/Suspension/Testing and Inspection/Component Tests and General
Diagnostics/Air Suspension System/Test Mode Procedure.
21. INSPECT SRS WARNING LIGHT
(a) Inspect the SRS warning light See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic
Overview/Diagnosis System.
From 08/2009
NAVIGATION / MULTI INFO DISPLAY: HARD DISK DRIVE: INSTALLATION
1. INSTALL HARD DISK DRIVE
(a) Install the hard disk drive as shown in the illustration.
NOTICE:
To reduce the chance of bending the pins, make sure to keep the hard disk drive straight when inserting it.
(b) Install the 2 screws.
2. INSTALL DISPLAY AND NAVIGATION MODULE DISPLAY WITH BRACKET See: Service and Repair/Navigation Receiver (for
HDD)/Installation
3. INSTALL SHIFT LEVER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
4. INSTALL CONSOLE BOX See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Installation
5. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER See: Radio, Stereo, and Compact Disc/Radio/Stereo/Service and
Repair/Installation
6. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument
Panel/Service and Repair/Removal and Replacement/Installation
7. INSTALL INSTRUMENT PANEL FINISH PANEL See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Removal and Replacement/Installation
8. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Dashboard /
Instrument Panel/Service and Repair/Removal and Replacement/Installation